The same batch and the same type of winding machine will have different performances in different customer enterprises. Winding machines and other equipment can exert their performance, and vice versa, it is easy to cause various unstable symptoms of the winding machine. So if we want to provide the stability of the winding machine, we can look at some methods of the winding machine manufacturer.

Factory with unsuitable ambient temperature, too low or too high temperature is the killer of all electronic products. This should be a consensus, so the equipment in the winding machine is equipped with auxiliary temperature adjustment equipment. If it refers to the environment, then a good factory environment includes temperature, temperature, ground, air, power, space, operators, and so on.

The ambient humidity is not suitable. The winding machine is composed of an integrated circuit of many electronic components, and its insulation performance has a great relationship with the environmental humidity. If the humidity is too large, it will easily cause the circuit board to be short-circuited and burned; if the humidity is too small, it will easily generate static electricity and will also break through some electronic components. Therefore, if the humidity is too large or too small, it will pose a potential threat to the winding machine.

If the power supply system is unstable, the power supply voltage fluctuates greatly, it is easy to power off, and the industry and life develop rapidly, the demand for electricity is also increasing. In many areas, there are cases of insufficient power supply, unstable voltage, and easy power outage. The voltage is unstable and the power is suddenly turned off, causing the system to restart frequently. The electronic components may be damaged due to the impact of the current. Therefore, the stability of the working environment power supply is related to whether the winding machine works normally or not. It can be protected by the regulated power supply and the UPS uninterruptible power supply. The specific equipment selection depends on the load power and the amount of work time required.

The ground has a large earthquake. Many factories need to produce mechanical displacement movements such as drag and vibration. This not only brings huge noise, but the severe vibration caused by the machine work may cause damage to the winding machine. It should be wound. A sponge is placed under the main body of the machine to cushion the object to reduce the risk of vibration.