We all know the structure of the winding machine, but have you understood the structure of the coil winding machine? Maybe we don't know enough about them, but because we don't know enough, we may not know how to choose when we choose coil winding machine, so we must first understand that we are going to buy, so we will choose in terms of choice. Get a big advantage. Therefore, the coil winding machine factory will explain the structure of some coil winding machines.

(1) Work turntable: It consists of indexing stepping motor, rotating table, wire fork and winding die. The device is a multi-task coil winding machine, which performs die preheating, trimming and heating at the same time. Process action such as demoulding, which requires the work turntable to be completed according to different work positions.

(2) Trimming structure: It is a pneumatic actuator, which mainly cuts the lead wires at both ends of the wound coil.

(3) Demoulding structure: It consists of indexing stepping motor and pneumatic demoulding, and the finished product is removed from the winding die.

(4) Hot air system: The equipment is equipped with two adjustable temperature 220V hot air guns. The mold is preheated before winding, and the coil is subjected to hot air treatment after winding to facilitate demoulding.

(5) Electrical control: including electrical control box, touch screen operation box. The DVP-20PM00D motion controller is used as the control core, the touch screen is used as the human-machine exchange, and the servo motor is used as the actuator to realize the accurate control of the rotating shaft and the cable, thereby ensuring the accuracy of the winding.

(6) Rack: The frame consists of an angle steel frame and a stainless steel table top, and the casters are arranged for easy movement. When the equipment is in place, the feet can be lowered to provide stable support.

(7) Tension structure: Installed on the incoming line, as the winding tension adjustment, to ensure the tension is kept constant when the coil is wound, the tension adjuster has the adjustment knob to adjust the tension adjustment for different needs. After the adjustment, the tension adjuster Automatically control the winding tension.

(8) Coil winding structure: mainly composed of servo motor, synchronous toothed belt and winding fly fork, which is the winding main shaft in the movement of electronic cam. The copper wire is wound around the winding die through the flying fork. One of the main moving parts of the coil winding machine.

(9) Cable structure: including servo motor, precision linear screw, precision guide rail, pneumatic sliding fork, etc., is the cable from the axis in the movement of the electronic cam, in the winding motion, following the reciprocating motion of the winding spindle in the forward and reverse directions The line action is one of the main moving parts of the coil winding machine.

The above is some introduction of the coil structure. When we understand these, we will give us a big advantage during our purchase.