The winding machine is usually equipped with a base at the factory, and is directly mounted on the ground. The base of high-quality cast iron is used to ensure sufficient winding force of the winding machine to the ground, improve the stability of the winding machine and reduce the work of the winding machine. Vibration when.

When the winding machine is mounted on a suitable foundation in the correct manner, the winding machine can be prevented from being deformed, worn and vibrated at a high speed, so that the rigidity and the coil quality of the winding machine can be maintained for a long time. For small and medium-sized winding machines, a relatively sturdy workbench is required. If necessary, the workbench needs to be equipped with appropriate damping devices. If the number and distribution of the fulcrums of the winding machine are improper or the fixing method is unreasonable, it will affect the whole machine. Performance and longevity.

For the manufacturer of the winding machine, the requirements for the site are to construct a foundation or workbench suitable for the operation and placement of the winding equipment to meet the requirements of the winding machine to the environment. The specific requirements are generally as follows:

1. The working table and foundation of the winding machine must be compatible with the base of the winding machine of this type, and the winding machine installed on it can be ensured to be firm and reliable, ensuring reliable grounding equipment around, and ensuring no large interference sources around. .

2. The working table and foundation of the winding machine should have sufficient strength and rigidity to avoid the violent vibration when the winding machine moves at high speed, to ensure that the vibration of the winding machine does not affect its own accuracy and life, and does not affect the coil. Quality, adjacent equipment and buildings should not adversely affect the winder.

3. The working table and foundation of the winding machine should have stability and durability, waterproof and anti-skid and corrosion of harmful objects to ensure no deformation or local subsidence. When the winder is placed in an environment where it may be exposed to chemical liquids, oil or corrosion, the foundation should be protected. For example, the surface of the foundation is coated with acid-proof and oil-proof cement mortar, and a liquid draining and collecting groove is provided.

4. The center of gravity of the winding machine and the total center of gravity of the workbench and the foundation are located on the same vertical line as the centripetal force of the ground plane.

5. The foundation of the large winder should be pre-pressed before the machine is installed. The pre-compression quality is 1.25 times the total mass of the winding machine and the total mass of the customer's workpiece. Pre-pressed materials are available in steel, sand and pebbles. The pre-pressed material should be pressed evenly on the foundation to ensure that the foundation is evenly sunk. The preloading work is carried out until the foundation does not continue to sink.

Many customers are not aware of how much impact the winding machine's environment has on its performance. Emphasizing the importance of the installation and use environment of the winding machine, strict control of the temperature, humidity, dust, vibration and other environmental requirements of the CNC winding machine, the arrangement of the winding machine should facilitate the process of the process, and regulate the transportation of raw materials and semi-finished products. And storage, a good and reasonable working environment of the equipment is not only beneficial to ensure the quality of the coil, but also to the maintenance of the winding machine.

The installation of the winding machine must be carried out in strict accordance with the requirements of the manual, and the use environment is also essential.